Antenna Phasing Harnesses and Signal Combiners
|
Matched Length Antenna Phasing Harness
- Coax cable assemblies are precision cut to exact matched lengths for
proper phasing of stacked antenna arrays
- Termination options include environmentally sealed Snap-N-Seal® connectors
on each end or one end prepped for direct connection to Blake PCB
baluns
- 95% Tinned Copper Braid for secure connection with PCB balun
mounting clamps
- Constructed using extra-low loss RG-6/U Precision Analog/Digital Video Cable
- 5.00 dB attenuation per 100' at
750 MHz
- 18 AWG Bare Copper Conductor
- Foam PE - Gas Injected Foam High Density Polyethylene insulation
- Dual Shield - 100% Foil - 95% Tinned Copper Braid
- PVC - Polyvinyl Chloride jacket (black)
- Structural Return Loss: 5 MHz - 3 GHz, 21-23 dB min.
- Belden 1694A Specifications
|
|
|
|
Phasing Harnesses
|
|
|
|
PH-30
One pair of matched cable assemblies with
Snap-N-Seal® connectors on each end. Short 36" length is for use with
CS-002 splitter located between the antennas. |
$30 |
|
|
|
PH-30B
One pair of matched cable assemblies with a
Snap-N-Seal® connector on one end and other end prepped for direct
connection to Blake PCB balun. Short 36" length is for use with CS-002
splitter located between the antennas. |
$30 |
|
|
|
PH-72
One pair of matched cable assemblies with
Snap-N-Seal® connectors on each end. Long 72" length. For CM-4248
antennas, use CS-538
mast mounted combiner. |
$35 |
|
|
|
PH-72B
One pair of matched cable assemblies with a
Snap-N-Seal® connector on one end and other end prepped for direct
connection to Blake PCB balun. Long 72" length for use with CS-538
mast mounted combiner. |
$35 |
|
|
|
PH-72C
One pair of matched cable assemblies with both ends prepped for direct
connection to Blake PCB balun/Labgear combiner. Long 72" length for use with CS-011
mast mounted combiner. |
$35 |
|
|
Signal Combiners
|
|
|
 |
|
|
|
CS-002
Winegard #SP-1002 5-1000MHz Splitter Use
this inline mounted combiner with the short 30" harnesses PH-30
for Channel Master antennas and PH-30B for Blake antennas. |
$8 |
N/A |
|
 |
|
|
|
CS-538
Channel Master #0538 Antenna Joiner/2-Way
Splitter
Use this mast mounted combiner with the long
72" harnesses PH-72 for Channel Master
antennas and PH-72B for Blake antennas. |
$12 |
N/A |
|
 |
|
|
|
CS-011
Labgear #6011/00 Low-loss UHF combiner/splitter
Use this mast mounted combiner with the long
72" harnesses
PH-72C for Blake antennas. |
$17 |
N/A |
