HTPC Cases

 HeatSync 7000

 Mini-Client 2500

 Micro-Client 300

 Heatsink 3500

 BD-2000

HTPC Systems

 HeatSync 7000

 Mini-Client 2500

 Micro-Client 300

 BD-2000

NAS Server Cases

 NAS-8x 2.5 series

 NAS-4x 3.5 series

 Mini-Server 5x

NAS Systems

 NAS-8x 2.5 series

 NAS-4x 3.5 series

Storage Cases

 Mass Storage 4x

 Mass Storage 8x

Gaming Systems

 HeatSync three-sixty

Accessories

 Specialty Products

 2.5" HDD Mounting

 Power Supplies

 DC-DC Converters

 Power cables

 Thermal Control

 Cooling Fans

 Fan Hardware

 Fan Cables

 Riser Cards

 Multilane Adapters

 Multilane Cables

 Drive Adapters

 Drive Power Cables

 SATA Cables

 IDE Cables

HDTV Reception

 Antenna Testing

 Antenna Products

 Stacking Kits

 Tilting Brackets

 Phasing Harnesses

 Low-loss Coax Cable

General Info

 About Us

 Support

 Policy

 Contact

Shopping Cart

 Check Out

Coaxial Cable

Shown above is RG-11 top, RG-6 bottom

 

For matched coax cables see: Phasing Harnesses for Stacked Antenna Arrays

RG-11/U Broadband Coax Cable

  • Lowest loss cable available, excellent for long runs between antenna and OTA receiver
  • 3.50 dB attenuation per 100' at 750 MHz
  • 14 AWG Bare Copper Covered Steel Conductor
  • Foam PE - Gas Injected Foam Polyethylene insulation
  • Quad Shield - 100% Foil - 60% Braid - 100% Foil - 40% Braid
  • PVC - Polyvinyl Chloride jacket (black)
  • Structural Return Loss: 5 MHz - 1 GHz, 20 dB min.
  • Belden 1617A Specifications

CC-11Q

RG-11/U Broadband Coax Cable, cut to length, price per foot

N/A  

CA-11Q

Cable assembled with (2) Snap-N-Seal® Type "F" Male Cable Connectors, add to price of cable

N/A  

FC-11

Snap-N-Seal® Type "F" Male Cable Connector

Fits RG-11 quad shield cable

N/A  

RG-6/U Precision Analog/Digital Video Cable

  • Extra-low loss RG-6 cable, use for antenna phasing harness and interconnect cables between video equipment
  • Precision video cables are used in critical analog video circuits and high quality applications such as live broadcast in network studios and pre- or post-production facilities. They should be used anywhere superior signal integrity is required.
  • 5.00 dB attenuation per 100' at 750 MHz
  • 18 AWG Bare Copper Conductor
  • Foam PE - Gas Injected Foam High Density Polyethylene insulation
  • Dual Shield -  100% Foil - 95% Tinned Copper Braid
  • PVC - Polyvinyl Chloride jacket (black)
  • Structural Return Loss: 5 MHz - 3 GHz, 21-23 dB min.
  • Belden 1694A Specifications

CC-6PV

RG-6/U Precision Video Cable, cut to length, price per foot

$0.75

CA-6PV

Cable assembled with (2) Snap-N-Seal® Type "F" Male Cable Connectors, add to price of cable

$17

CA-6PV-B

Cable assembled with (1) Snap-N-Seal® Type "F" Male Cable Connector and the other end prepped to connect to a PCB balun. Use this cable to hook up a single Blake antenna to mast mounted amp. Coax cable is 6 feet long.

$20


FC-6

Snap-N-Seal® Type "F" Male Cable Connector

Fits RG-6 standard cable

$0.95

 


Home

HTPC Cases

Accessories

Antennas

Support

Contact

Checkout

Copyright © 2001-2010  A-Tech Fabrication Company.  All rights reserved.