Detailed Information - Order Form

 Mini-Server 5x Order Form

Each case includes:
  • Fully assembled aluminum heatsink case
  • Mounting for ITX motherboard
  • Drive module plates for five hard drives
  • One set of drive module isolation pads
  • Slim-line DVD drive mount
  • Eject button for DVD drive
  • Power button with switch and wiring harness
  • Blue status LED with wiring harness
  • Hardware kit with all screws needed for assembly
  • Set of hex keys to work on your case

Compatible Slim-line DVD drives:
  • Panasonic Blu-ray UJ-225
  • Panasonic UJ-875
  • Panasonic UJ-85J
  • Panasonic UJ-850
  • Panasonic UJ-845-B
  • Panasonic UJ-825-B
  • Panasonic CW-8123
  • Panasonic CW-8124-B
  • Panasonic SR-8178
  • Pioneer DVR-K06
  • Pioneer DVR-K05
  • Pioneer DVR-K04L

Faceplate Color

Anodizing samples in clear and black
The aluminum case and all aluminum brackets are treated by a anodizing process for corrosion protection and long lasting uniform finish. The rear chassis and internal  parts have a black finish, the faceplate can be either black or silver.

 

 
Black Faceplate, Black Chassis
Silver Faceplate, Black Chassis
Laser Etched Graphics  
Faceplate is laser etched with custom graphics and lettering during the anodizing process. Graphics can include company logo, symbols, port labels, button labels, system specs, etc. Artwork provided should be in a vector format for best results.  We can create simple artwork for you or send us your custom designs. Approximate pricing for up to ten cases with same artwork:
  • Clear lettering on black case ($175)
  • Colored lettering on silver or black case ($200)

Pricing: Up to ten cases can be run for the same minimum charge or a small nominal fee per plate. Contact A-Tech for price quote.

 
No graphics or lettering
With custom graphics and lettering
Rack Mount

3U Rack Mount Faceplate

(1U case shown as example)
The one-piece rack mount faceplate incorporates rack mounting into the faceplate for a seamless look. The overall width of the faceplate is 19". Oval mounting holes are centered at 18.312". Faceplate height is 5.25" (3U). All of the same faceplate features on the standard faceplate are also available with the rack mount faceplate.

 
No rack mounting
With one-piece rack mount faceplate - add $50
Machined Billet Aluminum Case Feet
Enhance the appearance of your case with these machined billet aluminum case feet.

 

With Standard Rubber feet

With Black Aluminum Case Feet - add $30
With Silver Aluminum Case Feet - add $30
HeatSync® Cooling System

HeatSync® Cooling System on LV-677
Our HeatSync® Cooling system eliminates the need for fan cooling of the processor. With the HeatSync® Cooling system installed, heat from the processor is transferred into the heatsink case for dissipation to the outside air. Other MB's will be added to the order form in the future. You can also run most mini-ITX MB's in this case using the stock cooler but the HeatSync® Cooling system offers the best thermal performance.

Includes:

  • Copper mounting base for processor
  • Aluminum mounting base for chipset
  • Two pre-bent heat pipes
  • Two aluminum clamping plates for heatsink
  • Required installation hardware

 

No HeatSync® Cooling System

With HeatSync® Cooling System for Commel LV-677- add $120

With HeatSync® Cooling System for Commel LV-679- add $100

With HeatSync® Cooling System for MSI GM965- add $100

With HeatSync® Cooling System for Aopen i945GMt- add $100

With HeatSync® Cooling System for VIA 1500- add $120

 

We can quote the cost for others motherboards, but not every MB is a candidate for this system.

Shipping and Ordering Information

When will the case ship?  

Standard lead time is 2-3 weeks depending on options and color choice.

 

A-Tech Mini-Server 5x Case ... $549 + options

Please select options above before adding to cart. Before checking out, be sure to add any additional accessories below so that they can be shipped with your case.

 

 

Mini-Server 5x Case Accessories
80mm x 25mm Axial Fan  

80mm x 25mm Axial Fan
DC Brushless Axial Flow Fan made by Nexus. Ultra-Quiet operation.
  • 80mm x 25mm
  • 1500 RPM
  • 17.6 dBA
  • 20 CFM
  • 3-pin connector with RPM sensor
  • 4-pin Molex connector
  • 12 volts, 0.15 Amps
  • -10 to +70 deg C.

$13.50
PCI Riser Card  
Use this adapter to install a PCI card into the add-on slot above motherboard. This is for PCI cards only, PCIe cards require a flexible riser.

 

$13.50
Panasonic UJ-875-A DVD reader/writer:

Panasonic UJ-875-A DVD reader/writer

Slim-line SATA interface
Panasonic UJ-875-A is a slim-line DVD multi-burner for playback and recording of DVD's. The SATA interface requires a special slim-line power/data cable sold below.

 

Media
 Write Read
DVD-RAM 5X 5X
DVD-R 8X 8X
DVD-R DL (Dual Layer) 6X 8X
DVD-RW 6X 8X
DVD+R 8X 8X
DVD+R DL (Double Layer) 6X 8X
DVD+RW 8X 8X
DVD-ROM Single Layer - 8X
DVD-ROM Dual Layer - 8X
CD-R 24X 24X
CD-RW 24X 24X
CD-ROM - 24X

 
$99.95 each
Panasonic UJ-235-A Blu-ray reader/writer:

Panasonic UJ-235-A Blu-ray reader/writer

Slim-line SATA interface
Panasonic UJ-235-A is a slim-line Blu-ray optical drive for playback and recording of Blu-ray discs. The SATA interface requires a special slim-line power/data cable sold below.

 

Media
 Write Read
BD-ROM (Single Layer/Dual Layer) - 4X
BD-RE Single Layer 2X 2X
BD-RE Dual Layer 2X 2X
BD-R Single Layer 4X 4X
BD-R Dual Layer Dual Layer 2X 2X
DVD-RAM 5X 5X
DVD-R 8X 8X
DVD-R DL (Dual Layer) 4X 4X
DVD-RW 6X 6X
DVD+R 8X 8X
DVD+R DL (Double Layer) 4X 4X
DVD-ROM Single Layer - 8X
DVD-ROM Dual Layer - 8X
CD-R 24X 24X
CD-RW 16X 24X
CD-ROM - 24X

 
$399.95 each
Slim-line Drive SATA/Power Adapter  
This adapter allows a Serial ATA data cable to connect from the motherboard to a slim-line DVD or Blu-ray drive. The back of the adapter also has a connector for a floppy power cable and CD-out. Includes mounting screws.

$25.00
Slim-line Drive IDE/Power Adapter  
This adapter allows a standard 40-pin IDE data cable to connect from the motherboard to a slim-line DVD drive. The back of the adapter also has a connector for a floppy power and CD-out. Includes mounting screws.

$12.00
Serial ATA Data Cable

Serial ATA data cable with straight connectors at each end. The 12" long cable connect each drive to the MB or adapter card. Please note that most MB's and adapter cards may already include cables.

 

  $3.00      12" Length

Serial ATA Power Adapter Cable
Adapts 5.25" IDE power cable to dual SATA HDD power connectors. Use this cable to power two SATA drives.

 

$4.50 each

 

IDE Power Cable Splitter

Single IDE power cable to dual IDE power cable splitter.

 

$3.00 each

 

 

 

  

Home

HTPC Cases

Accessories

Antennas

 Support

Contact

 Checkout

Copyright © 2001-2010  A-Tech Fabrication Company.  All rights reserved.