HeatSync 7000 Order Form

Detailed Information - Case Order Form - Complete Systems

HeatSync 7000 Case Order Form

Slim-line Slot-load

Slim-line, Slot-loading drive slot

Faceplate is machined to fit a slim-line slot-load DVD drive. This type of drive takes up less space inside the case and allows for larger CPU coolers. Includes drive mounting brackets and hardware.

Compatible Slot-Load Blu-ray drives:

TEAC BD-C24SS-A

Compatible Slot-Load DVD drives:

TEAC DV-W28SS-VM3

Select Faceplate Style:

No Optical Drive slot or mounting - deduct $20

With Slim-line Slot-load Optical Drive mounting

Faceplate Color	Black case with silver faceplate
The aluminum case and all aluminum brackets are treated by an anodizing process for corrosion protection and a long lasting uniform finish. The rear portion of chassis is black anodized. The faceplate and buttons can be either black or silver.
Black case with Black faceplate Black case with Silver faceplate

Faceplate Logo Graphics

The Faceplate can include custom graphics and lettering during the anodizing process. Graphics can include company logo, button labels, system specs, and warning labels. Artwork to be provided by customer. Artwork should be in a vector format for best results. Preferred file format is PDF or Adobe Illustrator.

Approximate minimum pricing per job:

Single color artwork ($150)
Two color artwork ($200)

Contact A-Tech for price quote. Normally we can run several faceplates for the same minimum charge or a small nominal fee per extra plate.

No Logo

With single color logo graphics - add $150
With two color logo graphics - add $200

Rack Mounting

Rackmount Faceplate

Case can be provided with a one-piece 19" faceplate for rack mounting. This plate is 7.0" tall (4U) and 19" wide. The 7.0" faceplate extends above and below the 6.50" chassis by 0.25". Slotted and recessed holes are machined to accommodate rack mounting screws.

No Rack Mounting

With 19" Rack Mount Faceplate - add $80

Touch Screen Mounting	Touch Screen Mounting
Faceplate is machined with a cutout to fit a Xenarc 700TS LCD Touch Screen. The display can be used for operator input, previewing movies, or as a windows desktop. An infrared remote is included to turn the display on/off and control brightness, contrast, and display position settings. Touch screen display not included, purchase separately below. Touch Screen style faceplate Infrared remote control Internal 12 volt power cable
No Display Mounting With Touch Screen Mounting - add $85

Xenarc Touch Screen Display

Xenarc Touch Screen Display

A-Tech Fabrication is now authorized by Xenarc to install their touch screen displays into our cases. The display will have the full warranty from Xenarc. It will also include a special power cable to allow you to connect it to the power supply inside the case. The case will be shipped with the display installed into the faceplate. You must also purchase the touch screen mounting option above.

Xenarc 700TSV Display
VGA/composite video cable
USB TS input cable
Infrared remote control

No Xenarc Display
With Xenarc Display - add $400

VFD or LCD Mounting

Faceplate is machined with a cutout to fit a Matrix Orbital 4x20 display. Can be used with or without tinted filters. The blue filter looks nice with our blue LED option. Includes mounting hardware and spacers. Display and filter not included.

Supported models:

VK204-25-USB (most popular VFD)
VK204-25 (older serial VFD)
LK204-25 GW-WB-IY (low cost LCD)

With VFD/LCD Mounting - add $35

IR Receiver

Faceplate is machined with a cutout to fit a infrared receiver. Includes IR receiver, internal USB cable, and remote control. IR receiver works with Windows Vista and Windows 7 Home Premium and Ultimate versions -does not require drivers.

Note: USB-UIRT option does not include receiver or remote.

No IR receiver mounting
With IR receiver and remote - add $60

With USB-UIRT mounting - add $30

USB Port

USB 2.0 Port

Face plate is machined with cutout to fit a USB 2.0 port adapter. Internal cable plugs into the USB header on your motherboard. Standard port location is in the lower right corner. We can also add more ports if needed, please contact us for more information.

NOTE: When combined with the PowerMate option, the location of the USB port will be in the space between the reset button and the DVD control buttons.

No USB Port
With USB Port - add $25

DVD Push Button Controls	DVD Push Button Controls
Face plate is machined with cutouts to fit five custom machined push buttons. These buttons can be programmed to control software such as a DVD player. Button assembly comes pre-wired with header connector. This connector plugs into the keypad input connector on a Matrix Orbital VFD display (order separately above). Includes five (5) machined aluminum buttons, five (5) momentary switches, wire harness, and hardware. Note: DVD Push Button Controls cannot be combined Touch Screen option
No DVD Push Button Controls With DVD Push Button Controls - add $75

PowerMate Control Knob Mounting

Face plate is machined with a special cutout and mount to fit a Griffin Technology PowerMate controller and input device. This knob can be programmed for a number of tasks such as volume control and scrolling through menus. PowerMate knob not included.

Note: Griffin is not currently selling the knob in black. See the case accessories section below for our re-finishing service for black PowerMate knobs.

No PowerMate Mounting
With PowerMate Mounting - add $45

Power LED
The case comes fitted with a power LED. The LED color can either be basic green or blue for a different look.
With Green LED With Blue LED

Machined Billet Aluminum Case Feet

Enhance the appearance of your case with these precision machined, billet aluminum, anodized case feet.

With Standard Rubber feet

With Black Aluminum Case Feet - add $25
With Silver Aluminum Case Feet - add $25

Secondary Hard Drive Mount

Picture Coming Soon

Adds a second 3.5" hard drive mounted in front of power supply. Uses EAR isolation dampers to reduce vibration noise. Includes mounting brackets and hardware. Secondary HDD mount cannot be used with touch screen option.

No Secondary Hard Drive Mount

With Secondary Hard Drive Mount - add $35

CPU HeatSync® System

System (6) shown

Silent, solid-state cooling system for processor. No moving parts to maintain or fail which ensures reliable operation for years. CPU base is precision machined from solid copper for optimum heat transfer from processor chip. Heat-treated and anodized aluminum clamping plates transfer heat to the heatpipes. Heatpipes are custom formed to match your processor socket and motherboard. Wide thermal clamping plates conduct heat into the case.

Includes:

Copper CPU base
Precision spring retention system
Custom formed heatpipes
Thermal clamping plates w/ hardware

System (5)

Intel Mobile Socket 479

System (6)

Intel Socket LGA775

System (7)

AMD Socket 754 and 939

System (8)

AMD Socket AM2, AM2+, AM3

System (9)

Intel Socket LGA1366

System (10)

Intel Socket LGA1156

System (11)

Intel Socket LGA1155

No CPU HeatSync® System
With CPU HeatSync® System (5) - add $110

With CPU HeatSync® System (6) - add $175

With CPU HeatSync® System (7) - add $175

With CPU HeatSync® System (8) - add $175

With CPU HeatSync® System (9) - add $175

With CPU HeatSync® System (10) - add $175

With CPU HeatSync® System (11) - add $175

Specify the motherboard being used:

Note: Most all motherboards are supported

Video Card HeatSync® System

System (C) shown

Measure your card on the backside to determine which size mounting plate you will need

Silent, solid-state cooling system for video card processor. No moving parts to maintain or fail ensures reliable system operation for years. GPU base is precision machined from solid copper for optimum heat transfer from processor chip. Heatpipes are custom formed to match your motherboard and video card combination.

Includes:

Copper GPU base
Aluminum clamping plate
Precision spring retention system
Custom formed heatpipes

Maximum video card height:

4.375" PCIe

Maximum video card length:

9.50" with IR receiver
10.50" with touch screen or VFD
11.50" with no IR or displays

System (B)

Two heatpipes
older NVIDIA 6600 and 6800
Two-hole 3.12" diagonal spacing

System (C)

Two heatpipes
ATI Radeon 4850
NVIDIA 9500, 9600, 9800 series
Four-hole 2.97" diagonal spacing

System (D)

Two heatpipes
ATI Radeon 4670, 5750
Four-hole 2.40" diagonal spacing

Note: We suggest the ATI 5750 or NVIDIA 9500 cards as a good match for our coolers. If you are not sure which version to use, email us a link to your card and we can tell you which version cooler to choose. The majority of cards today use the System (C) design.

No Video HeatSync® System

With Video HeatSync® System (B) - add $80

With Video HeatSync® System (C) - add $80

With Video HeatSync® System (D) - add $80

Shipping and Ordering Information

These cases are custom made to your order. You may add additional options after work on your case has begun, however some changes may affect shipping time. If there is a custom option you would like to have that is not listed above, please contact us for a special quote. Options can also be added to your case at a later date, you only pay for the option plus a small refinishing fee.

When will the case ship?

Standard lead time is 2-3 weeks.

Quantity Discounts?

Discounts are available on orders of two or more cases. Contact A-Tech Fabrication for more information.

HeatSync 7000 Case .... $799 + options

Please select options above before adding to cart. Before checking out, be sure to add any additional accessories below so that they can be shipped with your case.

NOTE: The HeatSync^® 7000 is also available as a complete, fully assembled and ready to run system, see Complete Systems for details. If you feel assembling this case looks more difficult than you care to handle, save time and let the experts at A-Tech Fabrication assemble it for you!

Case Accessories

TEAC DVD reader/writer:

TEAC DVD reader/writer

Slim-line SATA interface

The TEAC DVD reader/writer is a slot-load, slim-line DVD optical drive for playback and recording of DVD's. The SATA interface requires a special slim-line power/data cable sold below.

TEAC DV-W28SS-VM3

Media	Write	Read
DVD-RAM	5X	5X
DVD-R	8X	8X
DVD-R DL (Dual Layer)	6X	8X
DVD-RW	6X	8X
DVD+R	8X	8X
DVD+R DL (Double Layer)	6X	8X
DVD+RW	8X	8X
DVD-ROM	-	8X
CD-R	24X	24X
CD-RW	24X	24X
CD-ROM	-	24X

$74.95 each

TEAC Blu-ray reader:

TEAC Blu-ray reader

Slim-line SATA interface

The TEAC Blu-ray reader, DVD writer is a slot-load, slim-line optical drive for playback of Blu-ray and DVD and recording to DVD. The SATA interface requires a special slim-line power/data cable sold below.

TEAC BD-C24SS-A

Media	Write	Read
BD-ROM (SL/DL)	-	4X
BD-RE (SL/DL)	-	2X
BD-R (SL/DL)	-	2X
DVD-RAM	5X	5X
DVD-R (SL)	8X	8X
DVD-R (DL)	4X	4X
DVD-RW	6X	6X
DVD+R (SL)	8X	8X
DVD+R (DL)	4X	6X
DVD+RW	8X	8X
DVD-ROM	-	8X
CD-R	24X	24X
CD-RW	24X	24X
CD-ROM	-	24X

$247.95 each

Slim-line SATA Cable - 18"
This cable is used on slim-line SATA DVD and Blu-ray drives. One end has a special connector to fit the drive, the other end has a standard SATA connector and 5 volt 4-pin Molex connector. 18" long. $12.00

Slim-line DVD Power Extension Cable
Due to the design of the door mounted DVD drive, a longer power cable may be needed. This cable is 14" long and has a 4-pin 5.25" power supply connector on one end and a floppy drive connector on the other. The floppy drive connector is used with most slim-line IDE adapters. $7.50

Arctic Silver 5 Thermal Compound
Made With 99.9% Pure Silver, Arctic Silver 5 uses three unique shapes and sizes of pure silver particles to maximize particle-to-particle contact area and thermal transfer. Arctic Silver 5 also contains sub-micron zinc oxide, aluminum oxide and boron nitride particles. These thermally-enhanced ceramic particles improve the performance and long-term stability. 3.5 gram tube Made in the USA
$9.75 each

PowerMate Knob Re-Finishing

Years ago, the Griffin Technology PowerMate was only available in silver. At that time we offered re-finishing of the knobs in black. Then Griffin started selling them in black. As of 2008, they are only available in silver and we our offering our re-finishing service again.

Service includes:

Remove plastic insert
Strip clear anodize
Re-polish outside surfaces
Anodize black
Bond plastic insert

Please ship your knob to address shown here

$20.00

Black Anodized Aluminum Slot Covers
These custom made black aluminum slot covers will dress up your HTPC case. Blends in perfectly with our black cases. Each cover is precision laser-cut, formed, and anodized.
$7.50 set of four (4)